Skip to content

EL296D / EL297D seriesLennox E347 fault code (EL296D / EL297D)

No 24 Volt output on Y1 of ”integrated control” with non communicating outdoor unit.

What the manual says

No 24 Volt output on Y1 of ”integrated control” with non communicating outdoor unit.

Models and series

Listed for: EL296D, EL297D.

Checks from the manual

  1. Operation stopped. Y1 relay / Stage 1 failed. (Pilot relay contacts did not close or the relay coil did not energize; no input back to IFC chip). Critical Alert. Cleared after reset and Y1 input sensed.

Source

EL296DFV Downflow Variable Communicating Service, p. 26

E347 | No 24 Volt output on Y1 of ”integrated
control” with non communicating outdoor
unit. | Operation stopped. Y1 relay / Stage 1 failed. (Pilot relay contacts
did not close or the relay coil did not energize; no input back to IFC
chip). Critical Alert. Cleared after reset and Y1 input sensed.

Other Lennox codes in this family

Ask about your unit

Last checked 2026-11-18 against EL296DFV Downflow Variable Communicating Service.

Safety: disconnect power before opening the unit. Gas, high voltage and refrigerant work belongs to a licensed technician.

No card

Start free — 14 days