Skip to content

MMLD018-048S6S, MMPD024-048S6S Outdoor Single Zone R-32 InstructionsLennox E198 fault code

Error on thermal fuse of indoor unit (Open)

What the manual says

Error on thermal fuse of indoor unit (Open)

Source

MMLD018-048S6S, MMPD024-048S6S Outdoor Single Zone R-32 Instructions, p. 50

No. | Error
Code | Meaning | Remarks
1 | E108 | Error due to duplicated communication address | Check on repeated indoor unit main
address
2 | E116 | R-32 detection sensor 'Short' or 'Open' or 'Abnormal
signal' error. | 1. Check R-32 sensor connector.
2. Check R-32 sensor wire.
3. Check R-32 sensor.
4. Change R-32 sensor.
3 | E118 | Indoor fan controller PCB overheat error | Check Indoor fan controller PCB
4 | E121 | Error on room temperature sensor of indoor unit (Short
or Open) | Indoor unit Room Thermistor Open/
Short
5 | E122 | Error on EVA IN sensor of indoor unit (Short or Open) | Indoor unit EVA IN Thermistor
_
Open/Short
6 | E123 | Error on EVA OUT sensor of indoor unit (Short or Open) | Indoor unit EVA OUT Thermistor
_
Open/Short
7 | E153 | Error on float switch (2nd detection) | Indoor unit Float Switch Open/
Short Drain Pump operation Check
8 | E154 | Indoor fan error | Check on indoor unit indoor Fan
operation
9 | E198 | Error on thermal fuse of indoor unit (Open) | Thermal Fuse Open Check of indoor
unit Terminal Block
10 | E201 | Communication error between the indoor unit and
outdoor unit (Pre-tracking failure or when the actual
number of indoor units are different from the indoor unit
quantity setting on the outdoor unit)
Error due to communication tracking failure after initial
power is supplied (The error occurs regardless of the
number of units.) | Check indoor quantity setting in
outdoor
11 | E202 | Communication error between indoor unit and outdoor
unit (When there is no response from indoor units after
tracking is completed) | Check electrical connection and
setting between indoor unit and
outdoor unit
12 | E203 | Communication error between the outdoor unit and main
micom (For PF #4 to #6 controllers, error will be determined
from the time when the compressor is turned on.) | Check electrical connection and
setting between outdoor unit MAIN
PBA - INVERTER PBA
13 | E205 | Main PBA - other PBA Communication error
(All other PBA communication error) | 1. Check Main PBA connectors
2. Check other PBA connectors
3. Change Mian PBA

Other Lennox codes in this family

Ask about your unit

Last checked 2026-11-18 against MMLD018-048S6S, MMPD024-048S6S Outdoor Single Zone R-32 Instructions.

Safety: disconnect power before opening the unit. Gas, high voltage and refrigerant work belongs to a licensed technician.

No card

Start free — 14 days