Skip to content

Upflow/Horizontal and Dedicated Downflow Gas-Fired, Direct/Non-Direct Vent, 2-Stage Condensing Variable Speed Furnaces A952VTrane e10 fault code

Communication error between variable speed inducer and blower motor microprocessor

What the manual says

Communication error between variable speed inducer and blower motor microprocessor

Checks from the manual

  1. 1. 1st stage gas valve not energized when it should be 2. 1st stage gas valve relay stuck closed 3. 2nd stage gas valve relay stuck closed 4. 2nd stage gas valve energized when it should not be 5. 2nd stage gas valve not energized when it should be e!2 | Open fuse e!3 | Blower HP/OEM ID e!4 | No PM and local copy bad e!s | Both of unit Data File in PM and local Unit Data File are corrupt e!7 | Blower motor no communication response e!8 | Blower communication failure on the control

Source

Upflow/Horizontal and Dedicated Downflow Gas-Fired, Direct/Non-Direct Vent, 2-Stage Condensing Variable Speed Furnaces A952V, p. 89

e10 | Communication error between variable speed
inducer and blower motor microprocessor
e!! | 1. 1st stage gas valve not energized when it
should be
2. 1st stage gas valve relay stuck closed
3. 2nd stage gas valve relay stuck closed
4. 2nd stage gas valve energized when it should
not be
5. 2nd stage gas valve not energized when it
should be
e!2 | Open fuse
e!3 | Blower HP/OEM ID
e!4 | No PM and local copy bad
e!s | Both of unit Data File in PM and local Unit Data File
are corrupt
e!7 | Blower motor no communication response
e!8 | Blower communication failure on the control

Other Trane codes in this family

Ask about your unit

Last checked 2026-11-18 against Upflow/Horizontal and Dedicated Downflow Gas-Fired, Direct/Non-Direct Vent, 2-Stage Condensing Variable Speed Furnaces A952V.

Safety: disconnect power before opening the unit. Gas, high voltage and refrigerant work belongs to a licensed technician.

No card

Start free — 14 days