Trane Alert Codes (ComfortLink II Alarm ID list)Trane CL2.181.15 fault code
ADC current exceeded
What the manual says
ADC current exceeded
Source
Trane Alert Codes (ComfortLink II Alarm ID list), p. 11
CL2.181.15 | Major | ADC CUR EX | ADC current exceeded | Internal fault with current sensor | Cycle power and see if alert clears **Call for tech support, record failure mode for warranty claim before replacing Drive | | CL2.182.00 | Normal | STRT SOFT LO | Startup algorithm fault | Compressor has a failed startup attempt | Drive is limiting compressor speed due to Inverter high temperature or high current | | CL2.182.01 | Critical | STRT HARD LO | Startup algorithm fault | 5 startup soft lockouts occurred without a successful start | Drive is limiting compressor speed due to Inverter high temperature or high current | | CL2.183.00 | Major | SHTDWN CO | Startup algorithm fault | Compressor does not come to a complete stop even after the defined time and continues to run even after control is released | Loss of internal communication. If error continues after system resets, call for tech support. | | CL2.184.00 | Normal | IDCF CO | Protection algorithm
Ask about your unit
Last checked 2026-11-18 against Trane Alert Codes (ComfortLink II Alarm ID list).
Safety: disconnect power before opening the unit. Gas, high voltage and refrigerant work belongs to a licensed technician.