Trane Alert Codes (ComfortLink II Alarm ID list)Trane CL2.101.00 fault code
Y1 Off Error
What the manual says
Y1 Off Error
Source
Trane Alert Codes (ComfortLink II Alarm ID list), p. 5
CL2.101.00 | Major | Y1 Off Err | Y1 Off Error | Y1 relay on indoor unit control board is “OFF” with a call for cooling **If comfort control is setup for single stage cooling and a communicating outdoor unit is not discovered on the communicating bus, the Y1 relay on the indoor control board will apply 24v to Y1 terminal on a active call for cooling | Internal control failure **Replace control board | | CL2.101.01 | Major | Y1 On Err | Y1 On Error | Y1 relay on indoor unit control board is “ON” without a call for cooling **If comfort control is setup for single stage cooling and a communicating outdoor unit is not discovered on the communicating bus, the Y1 relay on the indoor control board will apply 24v to Y1 terminal on a active call for cooling | 24 volts sensed on Y1 terminal of low voltage terminal board without an active call for cooling 24 volts applied to Y1 terminal when a communicating outdoor unit is installed Onboard Y1 relay stuck closed **Replace control board | | CL2.102.00 | Major | Y2 No Y1 | Y2 No Y1 | 24 volts detected on Y2 without voltage applied on Y1 | Y1 and Y2 field wiring reversed | | CL2.104.00 | Normal | HT Off Err EH RLY OPEN# | Heat Off Error Electric heat relay stuck open | Heat relay on control board is stuck open | Replace control board | | CL2.104.01 | Normal | HT On Err EH RLY WELD# | Heat On Error Electric heat relay stuck closed | Voltage is being sensed by onboard sensing circuit when no voltage should be
Ask about your unit
Last checked 2026-11-18 against Trane Alert Codes (ComfortLink II Alarm ID list).
Safety: disconnect power before opening the unit. Gas, high voltage and refrigerant work belongs to a licensed technician.