Skip to content

Trane Alert Codes (ComfortLink II Alarm ID list)Trane CL2.091.02 fault code

System Comm Error

What the manual says

System Comm Error

Source

Trane Alert Codes (ComfortLink II Alarm ID list), p. 5

CL2.091.02 | Critical | Sys Comm Err | System Comm Error | Loss of heat/cool demand
**Heat/Cool demand is generated by
comfort control every 1 minute and a fault
is reported after 3 missed messages | Data line to comfort control broken or disconnected
**0vDC measured between D & B at comfort control with
~12vDC measured at indoor unit
Data (D) line and common (B) line reversed at outdoor
unit
**The Bit Master LED on indoor control board will be off,
dim or flickering
**0vDC will be measured with D & B wires connected at
outdoor unit
**12vDC will be measured on D & B field wires when
disconnected from outdoor unit
Data (D) line grounded going to outdoor unit
**The Bit Master LED on indoor control board will be off,
dim or flickering
**0vDC will be measured with D & B wires connected at
outdoor unit
**0vDC will also be measured on D & B field wires when
disconnected from outdoor unit
If a communicating air cleaner is installed, remove (D)
data wire and check to see if fault clears |  |

Other Trane codes in this family

Ask about your unit

Last checked 2026-11-18 against Trane Alert Codes (ComfortLink II Alarm ID list).

Safety: disconnect power before opening the unit. Gas, high voltage and refrigerant work belongs to a licensed technician.

No card

Start free — 14 days