MMLD018-048S6S, MMPD024-048S6S Outdoor Single Zone R-32 InstructionsLennox E665 fault code
External Contact Input ERROR
What the manual says
External Contact Input ERROR
Source
MMLD018-048S6S, MMPD024-048S6S Outdoor Single Zone R-32 Instructions, p. 53
No. | Error Code | Meaning | Remarks 54 | E493 | FAN #1 motor output current error | 1. Change motor 2. Change INV PCB 55 | E496 | FAN #1 motor voltage sensor error | 1. Change motor 2. Change INV PCB 56 | E499 | FAN #1 IPM temperature sensor error | 1. Change motor 2. Change INV PCB 57 | E500 | IPM overheat error on inverter 1 | Check Outdoor Inverter PBA. 58 | E507 | Error due to high pressure switch open or compressor down by high pressure | - 59 | E508 | Smart install is not installed | - 60 | E534 | Blockage detected on high pressure pipe during heating operation. | 1. Check if the service valve is open 2. Check if there's any blockage on the refrigerant cycle (indoor unit/outdoor unit) 3. Check the EEV connection and operation 4. Check if the connecting wire and the pipe are OK 5. Check the compressor 61 | E554 | Gas leak detected | Check the refrigerant 62 | E556 | Error due to mismatching capacity of indoor and outdoor unit | Check the indoor and outdoor unit capacity 63 | E557 | DPM remote controller option error | Check the indoor option code 64 | E563 | Error due to mismatching indoor and outdoor unit | Check the outdoor EEPROM data and indoor option code 65 | E590 | Inverter EEPROM Checksum error | - 66 | E594 | Fan EEPROM CheckSum error | 1. Check Fan EEPROM 67 | E601 | Communication error between wired remote control and indoor unit | 1. Check remote control wire connectors. 2. Change wired remote control. 68 | E665 | External Contact Input ERROR | 1. Check the External float switch connection. 2. Check whether the drain has been filled with water. 3. Check the emergency alarm system (Emergency Stop) 69 | E695 | R-32 detection sensor life unpredictable error | 1. Check R-32 sensor. 2. Change R-32 sensor.
Ask about your unit
Last checked 2026-11-18 against MMLD018-048S6S, MMPD024-048S6S Outdoor Single Zone R-32 Instructions.
Safety: disconnect power before opening the unit. Gas, high voltage and refrigerant work belongs to a licensed technician.