Skip to content

MMLD020S6M-1P / MMLD024S6M-1P / MMLD030S6M-1P / MMLD036S6M-1P / MMPD020S6M-1P / MMPD024S6M-1P / MMPD036S6M-1P / MMPD048S6M-1P seriesLennox E485 fault code

System EEV coil currrent too high. Heat pump heating operation stopped. Check system EEV coil connection to the EEV controller.

What the manual says

System EEV coil currrent too high. Heat pump heating operation stopped. Check system EEV coil connection to the EEV controller.

Models and series

Listed for: MMLD020S6M-1P, MMLD024S6M-1P, MMLD030S6M-1P, MMLD036S6M-1P, MMPD020S6M-1P, MMPD024S6M-1P, MMPD036S6M-1P, MMPD048S6M-1P.

Troubleshooting from the service manual

  1. 8. / Input current sensor error: E485

    Input current sensor error: E485 - Detect the input sensor while the set is in stop status to check if there’s any problem. - When error occurs, turn on/off the power for number of time and if same error occurs while the power is off,

    Lennox Powered by Samsung Mini-Split (AC) Service, p. 160

Source

EL21KLV | UNIT INFORMATION | Service Literature, p. 50

E485 | N/A | N/A | N/A | N/A | System EEV coil currrent too high. Heat pump heating operation stopped. Check system EEV coil
connection to the EEV controller. |
Ask about your unit

Last checked 2026-11-18 against EL21KLV | UNIT INFORMATION | Service Literature.

Safety: disconnect power before opening the unit. Gas, high voltage and refrigerant work belongs to a licensed technician.

No card

Start free — 14 days