Skip to content

RESI-GF-A93DF1EK-92G1DFEK-DOWNFLOW-INSTALLATIONMANUALArmstrong Air E227 fault code

Pressure switch open during trial for ignition or run mode.

What the manual says

Pressure switch open during trial for ignition or run mode.

Checks from the manual

  1. Check pressure (inches w.c.) of pressure switch closing on heat call. Measure operating pressure (inches w.c.). Inspect vent and combustion air inducer for correct operation and restriction. Resumes normal operation after fault is cleared.

Source

RESI-GF-A93DF1EK-92G1DFEK-DOWNFLOW-INSTALLATIONMANUAL, p. 44

E227 | Pressure switch open during trial for ignition or
run mode. | Check pressure (inches w.c.) of pressure switch closing on heat
call. Measure operating pressure (inches w.c.). Inspect vent and
combustion air inducer for correct operation and restriction. Resumes
normal operation after fault is cleared.

Other Armstrong Air codes in this family

Ask about your unit

Last checked 2026-11-18 against RESI-GF-A93DF1EK-92G1DFEK-DOWNFLOW-INSTALLATIONMANUAL.

Safety: disconnect power before opening the unit. Gas, high voltage and refrigerant work belongs to a licensed technician.

No card

Start free — 14 days